PIXAIR 2

Sizes : S / M / L  -  Weight : 3270 g (Size Medium)

STABILITY, SAFETY & COMFORT

 

Pilots' recommendations

Progression & XC

 

About the SUPAIR PIXAIR 2

 

This Airbag progression harness is meant to tackle thermal and long-distance flights. The geometry of the PIXAIR 2 provides intuitive and accessible steering abilities. A harness to progress in complete safety.

 

pixair2-1.jpegpixair2-3.jpeg

STABLE WITH A PROVEN, EASY AND INTUITIVE GEOMETRY.
SAFETY: EFFICIENT PRE-INFLATED AIRBAG.
COMFORTABLE: DESIGNED WITH AN EXCELLENT SUPPORT DISTRIBUTION.

pixair2-4.jpegpixair2-5.jpegpixair2-2.jpeg

PIXAIR 2 takes after the PIXAIR design and improves on the following points:
– New parachute pocket: with better sealing, an opening with “tulip” type flaps, an internal pocket to keep the parachute from turning over.
– Easier seated transition.
– Redesigned dorsal pocket with a smaller volume.
– Interchangeable Airbag Mylar stiffener.
– New design

Pixair_Focus.png

The PIXAIR 2 is the AIRBAG progression harness within the SUPAIR range. On the ground, it is easy to handle and setup before an inflation and takeoff. In flight it is very comfortable with a rather upright posture. Its geometry brings peace of mind in flight by providing a good feedback from the wing.

The PIXAIR 2 is lightweight (3270g in size M), compact and easily folded due to its AIRBAG design. Safety is complete with a high-performance AIRBAG (X g during the certification tests), with a stable geometry, a reserve parachute pocket under the seat plate and an easy to locate reserve parachute handle.

 

Retail price for the SUPAIR PIXAIR 2:  1 470.00 NZ$*

Contact us for the best current deals before it's too late!

 

Safety

 

Pixair2_Safety.png

A – RESCUE PARACHUTE POCKET
B – COMPLETE AIRBAG (DORSAL & UNDER THE SEAT)
C – DORSAL STORAGE POCKET

 

 

Specifications

Piloting
Progression & thermals
Position : upright sitting

Safety
Complete AirBag protection under the seat and dorsal with pre-inflated internal cells
Adjustable reserve parachute pocket (bottom right)
Quick release buckles with Safe-T-Bar locking mechanism
30 mm Self-Locking Biners
Self-locking light 25 mm aluminum buckles

Gear & Comfort
Lateral wrapping skirts
Speed-Bar pulleys
Elasticated Speed-Bar recoil
Foot-rest ready (retractable models only)
AIRBAG interchangeable Mylar stiffener

Storage
Large dorsal storage pocket independent from Airbag
Zipping lateral storage pockets
Pre-equipped to receive a radio
Pre-equipped to accept the hydration pack
Under the seat speedbar storage capacity

Adjustments
Shoulder straps adjustments
Backrest adjustment with lumbar support
Chest strap adjustment
Adjustable leg-straps length
Seat depth adjustment

Materials
Nylon 210D Ripstop

Certification
LTF Norm
EN 1651 Norm

designed-in-annecy_made-in-europe

 

 

Measurements

 

mesure_harnesses (2).jpg

    S M L
  Pilot size (cm) 155 / 175 170 / 185 180 / 195
  Pilot weight (min – max) (kg) 60 – 80 65 – 85 70 – 100
  Harness weight (delivered) (g) 3160 3270 3380
A Back length (cm) 57 64 70
B Back inclination length (cm) 35 37 38
C Seat length (cm) 46 47 48
D Seat width (cm) 35 37 40
E Carabiners height (cm) 44 45 46
F Distance between carabiners (cm) 36 – 46 36 – 46 36 – 46
       
         
         
         
         
         
         
         
         
         

 

 

Scope of delivery


– 2 SUPAIR Zicral 30mm self-locking carabiners
– Parachute pocket handle
– Polypropylene seat plate
– Elasticated Speed-Bar recoil
– User’s manual

 

Options

( Sold separately )

– Retractable foot-rest 20mm (ref. : CALEPIEDRETRACT20)
– 2B standard speedbar (ref. : ACCELSOUPLE)
– Adjustable Freespee speedbar (ref. : ACELLFREESPEE)
– 2B light speedbar (ref. : ACCELSOUPLELIGHT)

 

 

  • slide
  • slide
  • slide
  • slide
  • slide
  • slide
  • slide

We use cookies to give you the best possible experience on our site. By continuing to use the site you agree to our use of cookies.
We have a new privacy policy        Cookies policy

Ok

© 2024 - GlidePro